PDA

View Full Version : Converting Onza 3?



nnelzon23
06-06-2011, 09:39 PM
Id like to convert my Onza 3 to a slide and stop instead of TRG. Can this be done, and if so, what parts and size do I need? What size groove is cut in the bottom of the riser? Is the TRG 3/8"? Thanks for any help.

MLN1963
06-07-2011, 04:26 AM
No, the lower slot is smaller and the string stop Martin sent me was stepped down from 3/8" to whatever the new size is.

I suggest you call customer service and ask them for the parts to convert. I bet they send all the parts free of charge. They seem to be handing out these pieces like candy.

Arrow Splitter
06-07-2011, 01:25 PM
No, the lower slot is smaller and the string stop Martin sent me was stepped down from 3/8" to whatever the new size is.

I suggest you call customer service and ask them for the parts to convert. I bet they send all the parts free of charge. They seem to be handing out these pieces like candy.
X2 I'd definitely call Martin.

A.S

the-beagle
06-08-2011, 05:59 PM
Call martin, they will take care of you. They sent me an STS for the lower groove. Not sure what to do with the trg. I miss the ccs on the 09's and 10's.