PDA

View Full Version : Can You Tell Me if these limbs will work ..On a Firecat ...????



ftshooter
07-04-2011, 03:26 PM
I found a set of 2m limbs off a 2010 shadowcat these are the 4X Laminated CoreFlex Limbs....I want to put these my 08 Firecat which had 2H limbs..and it is a 60lb bow so, these new limbs should be about 57 lbs ...Right , and they should fit ok and everything ? .Oh and are these better made or the same as the the pro x limbs ??...Thanks,,,

archerx7
07-04-2011, 03:37 PM
You'll need 09 or newer roto cups also, the 08's had 2 alignment pins that the holes in the limbs aligned with. 09 and newer limbs won't have the alignment holes drilled. Pretty sure there were fewer issues with the 4X limbs than the 08's.

ftshooter
07-04-2011, 03:42 PM
Thanks ,,,Dang....where can I get the 09 or newer roto cups ...? I thought I had it fixed ..But, that is why I asked ..Thanks,, for any help you can give

Speedykills
07-04-2011, 03:50 PM
You'll need 09 or newer roto cups also, the 08's had 2 alignment pins that the holes in the limbs aligned with. 09 and newer limbs won't have the alignment holes drilled. Pretty sure there were fewer issues with the 4X limbs than the 08's.

Yep he's right my 08 firecat was updated with new 2010 limbs and cat2 cams and new roto cups,these are some nice shooting bows too.

ftshooter
07-04-2011, 04:34 PM
...I just found this Out.......2010 limbs and roto limb cups will adapt to the 08-09 models but the 2008 or 2009 cam systems will not work with the 2010 limbs

HawgEnvy
07-04-2011, 06:12 PM
... the 2008 or 2009 cam systems will not work with the 2010 limbs

who says? Might want to measure to be sure. My '08 Cheetah has 13" limbs. I don't remember the measurement between limb tips or the thickness, but my Athens Barnesdale limbs can be used on the Cheetah. IMO, measure the limbs yourself and compare if possible.