PDA

View Full Version : Martin Whisker biscuit w/Locmount needed for mount?



Jason
07-09-2011, 05:47 PM
I am looking to purchase the firecat 400 soon. I already own a 70 dollar whisker biscuit. Is this one needed for mounting on this bow or what?
http://www.shopatron.com/products/productdetail/Whisker+Biscuit+w/+Martin+Loc-Mount%2C+R.+H.+Black+only/part_number=2964/189.0.1.1.23386.0.0.0.0?pp=12&

Arrow Splitter
07-09-2011, 06:25 PM
No, you can use any rest you like.

A.S

gravedigger
07-09-2011, 07:48 PM
no need to buy martin products to be put on a martin bow.pick a rest you want and mount away

Jason
07-09-2011, 08:04 PM
So what is the point in the Loc mount? Twisting from brush or something like that? Im not just not visualizing this right. The one I have now has no chance of movement unless you throw it out of the tree or something.

justin
07-09-2011, 08:30 PM
no, you got it pretty well figured out it sounds like... martin offers an alternate mounting method though. maybe fugure out some other trinket u can put on your bow :)

Destroyer
07-09-2011, 10:53 PM
So what is the point in the Loc mount?

Better locking without grub screws and easier setup. :)

Hutch~n~Son Archery
07-10-2011, 03:13 AM
So what is the point in the Loc mount? Twisting from brush or something like that? Im not just not visualizing this right. The one I have now has no chance of movement unless you throw it out of the tree or something.No alignment necessary two screws and it is done. One final adjustment Left or Right for center shot and you are ready to shoot. You can't do that with a regular whisker b.


Hutch:cool:

Jason
07-10-2011, 10:51 AM
Thanks everyone. That is pretty clear to understand. Now I am thinking I just be able to buy the Locmount w/out the whisker b. and attach my own to the mount but I dont know if you can do that either. I would have to go look.. Thanks again though.

DBG
07-10-2011, 11:17 AM
In your post you mentioned the firecat 400, the firecat 400 riser is a standard setup and is not drilled for the lockmount :)

Jason
07-11-2011, 02:35 AM
In your post you mentioned the firecat 400, the firecat 400 riser is a standard setup and is not drilled for the lockmount :)

Thanks. That is very helpful!