PDA

View Full Version : Creep tuning



Ehunter
07-23-2011, 04:05 AM
Does anyone ever creep tune to check cam timing? What do you consider an acceptable variance in shot placement? I finished shooting in centershot and nock point, and started creep tuning. I'm about 1 1/2 inches low at 20 yards when I creep about 1/4 inch. Cams look like they are in time on the drawboard, but this makes me think my top cam might be just a hair behind the bottom one. Thanks for your input!

Ehunter
07-23-2011, 05:15 AM
Sonny, I had read, (I know, dangerous lol) that if you pull hard into the wall and shoot, then use a soft draw, the two arrows should impact the exact same place. I tried this on my FC400, and the soft shot was low. Both cams seem to be very close to in time if not dead on. I can't feel the cams hitting at two different lengths, both seem to bottom out at the same time. Bow is quiet, and pretty much vibration free. I thought that maybe this could be part of my broadhead tuning problems. Put 1/2 twist in the cable feeding into my top cam since the soft shot was low, and that screwed everything up. lol Now either way, I'm hitting 2 feet low. Putting it back the way it was, and call it good. I'll just move my sights for broadheads if I have to.

Ehunter
07-23-2011, 10:06 AM
Sonny, I was just using the 1/4 inch as a number. Probably more like 1/8th or less. I was at the wall, just not pulling hard into it. I also realised why I was hitting low after adding 1/2 twist to my upper cam cable. Draw cord on my rest had moved and it wasn't coming up all the way. That's what I get for being lazy and not serving it in originally, even though it had never moved before. Everything is back to shooting well again.

Destroyer
07-23-2011, 04:23 PM
Don't use it at all, I just draw the bow the same each time. :p

Robert58
11-05-2011, 08:01 PM
When I am setting a bow without a hard wall. I like to have the top cam rolling over about 1/8" before the bottom cam.

Got to Spot Hogg.com and read news letter number 10, I thnk.

Robert

Hutch~n~Son Archery
01-27-2012, 08:58 PM
Creep tuning is a good way to get your cam's in sync.




http://www.youtube.com/watch?v=P41jnT_6OVI



http://www.redhawk-archery.com/creep.php



Hutch:cool:

Spiker
01-28-2012, 09:05 AM
Creep tuning ??You mean having me tune your bow .???

Hutch~n~Son Archery
01-28-2012, 12:38 PM
Creep tuning ??You mean having me tune your bow .???Now that would be really creepy!http://d2bbx2n1xhw9pj.cloudfront.net/forums/images/smilies/mood_shocked.gif








Hutchhttp://d2bbx2n1xhw9pj.cloudfront.net/forums/images/smilies/throfl116.gif

Arrow Splitter
01-28-2012, 12:45 PM
And scary.http://www.freesmileys.org/smileys/smiley-scared001.gif (http://www.freesmileys.org/smileys.php):D