View Full Version : Scepter II Elite Lilmbs Nitrous A Cam
11-18-2005, 04:02 PM
Scepter II Elite Limbs with Nitrous A Cams what would be the string and cable lengths.
11-19-2005, 06:14 PM
One of the problems is that Martin never made this bow with Nitrous cams, but they did make the S3 with nitrous cams.
The ATA on the S2 elite and the S3 elite is the same, so you could start with the cable and string length for the 04 S3 elite with nitrous. It may not be exact to fit you but remember that the nitrous only adjusts to the nearest half inch anyway and string or cable adjustment is necessary to get your fit exact.
In any event I would recommend the brace height be about 8 inches. Start with the limbs you have before buying new limbs, you can adjust from there.
55 1/2" shoot and 44 3/4" cables....
Same as the Scepter III...hope this helps!
02-20-2010, 12:43 PM
I used the string and cable lenghts PUG said. My ATA is 43 1/2". Brace height is 8 3/8". It shoots great. When you look up my lousy scores, IT'S NOT THE BOWS FAULT.
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.