PDA

View Full Version : saber dyna cam f-4 mod problem



MRHAPPY
05-17-2007, 12:59 AM
have had this new 2006 bow about a month now and the draw mod kept getting loose(screws getting loose)kept tightening them, finally they won't tighten now, how do i get a new f-4(28 mod) do they have better ones than the plastic ones that comes with the bows?

bfisher
05-17-2007, 09:31 AM
Did you buy the bow from a dealer? If so then he should have modules to replace the stripped ones. Every bow is shipped with a complete set of modules.

So far as I know there is no other modules besides the plastic ones issued for the bow. If the screws keep working loose then maybe you have some other issue such as excess vibration. Or it's possible that they were over tightened in the first place.

Wish you well.

Elk4me
05-17-2007, 09:58 PM
I know I had a Aluminium F2 mod on my Saber last yr! So I bet you can contact your dealer and have him order one for you! I have a F5 I can send you for FREE till you can get a replacement one. If you want it you can have it. It will make your DL 30 " but if ya put it on Peg 3 peg will make it 29.5" DL if ya want . PM me your Address here or on AT or Email me: thegrt169@hotmail. I will get it out to you Tomorrrow or Sat . How ever fast you get me your info is as fast as I can mail it!


26"F-1 27" F-2 28"F-3 29"F-4 30" F-6 31" F-7
SE Saber

Shoot String: 88
Split String: 36"

Myk
05-20-2007, 10:30 AM
You can order Martin F-mod bows either with the plastic module pack or with a single aluminum module.

An aluminum module should be available.

MRHAPPY
05-21-2007, 10:14 AM
i have the f-4 mod for the saber, its the 28 inch mod in told, changed to the f-3 because the other stripped and using the number 1 pin making it 27.5 right? still want to get the aluminum mods, can i order through martin direct? price of them? thanks

Elk4me
05-22-2007, 06:47 AM
Acording to the Martin charts the f3 mod on a 06 Saber is 28" on the #2 post.:cool:

MRHAPPY
05-22-2007, 08:45 AM
i was told on here f-4 is 28 draw for the dyna cam on the number 2 post? had it set up at dealer for 28 draw and thats what they put on?

Elk4me
05-22-2007, 05:44 PM
We'll your dealer is wrong I have shot the Saber, and the Cougar III and 28" is the F3 mod. I am not trying to arguee with you buddy I am just stating the facts on the Martin charts ! But if you think 28 " DL is the f4 Mod go ahead and use it if your comfortable! I just know the F3 mod is 28":cool: Have a great day and good shooting!

Elk4me
05-22-2007, 05:47 PM
SE Saber
26"F-1 27" F-2 28"F-3 29"F-4 30" F-6 31" F-7
Shoot String: 88
Split String: 36"

This info is right off the Martin Website too show you! Your bow modle is a 2006 Saber with a Dynacam. Modle - M-82 on the cam charts!:eek:

bfisher
05-22-2007, 10:09 PM
i was told on here f-4 is 28 draw for the dyna cam on the number 2 post? had it set up at dealer for 28 draw and thats what they put on?

Elk is right. I have the chart right here in front of me. The F3 mod is for 28" and the F5 mod is for 29". There is no draw length listed for the F4, but I'd say it could go either 29 or 28 depending on which post the string is connected to.

MRHAPPY
05-25-2007, 08:06 PM
mine had the f-1 through f-7 mod pack, it had the f-4 on it on the number 2 post, you saying its 29?

MRHAPPY
05-25-2007, 08:25 PM
i just check the martin site, your right it shows f-3 as 28 in,but i have a f-4 and it doesn't show anything for it? why? it looks different than the f-3 for sure, i guess i will have to talk to someone from martin and see what size it is and why it doesnt say on the draw chart? thanks for your help