PDA

View Full Version : concern or not?



russ65034
08-24-2011, 01:28 PM
Got to loooking at my bow. Was wondering if the risers are 1 or 2 piece because on the upper 1/3 just above sight mount and right below the top vem there appears to be a crack or somethingI can take fingernail and rub across it and feel a little ridge. I know pics would be great and will put some up if I can figure out how. Thanks

Hutch~n~Son Archery
08-24-2011, 02:01 PM
Pics are about the only way we can really tell. When you reply to the thread there will be a image above, when highlighted it will say image click on it and click the tab that says computer browse your computer and find the pic you are looking for.



Hutch :cool:

russ65034
08-24-2011, 02:54 PM
thanks. will see what happens

Destroyer
08-24-2011, 02:56 PM
3 piece. Won't be a crack but a join if its the same old issue.

HawgEnvy
08-24-2011, 04:08 PM
3 piece. Won't be a crack but a join if its the same old issue.

yup,3pc. two bolts behind the VEM arrow shelf (can see the seam nearly inline with your string)and the three above the sight mount. on my '08 Cheetah,that is.not sure if all are the same. what bow is it? in any case,its no issue involved. those bolts aint gonna budge even a little bit. just enjoy your bow and dont worry about it

russ65034
08-24-2011, 04:15 PM
4070 hope this is ok

HawgEnvy
08-24-2011, 04:30 PM
all is well. just a seam where riser is bolted together. ive had mine down to bare aluminum. nothing to worry about.

cjchasman
08-24-2011, 04:34 PM
http://martinarchery.com/mtechforum/showthread.php?9769-One-piece-riser!/page5

This is Hawg's bow. May help for visual.

cj

russ65034
08-24-2011, 04:57 PM
Awesome guy's. Thanks alot, Russ

Hutch~n~Son Archery
08-24-2011, 05:26 PM
Looks fine shoot that puppy!




Hutch:cool: