PDA

View Full Version : Need some help guys



madlaz
09-01-2011, 04:08 AM
Lost my notes i have two sets of elite limbs 3m and 4h does anyone know what the draw wts would be on a mystic with furious cams I used to know but cant find my note book thanks for the help.

madlaz
09-01-2011, 06:25 AM
Any one got to be someone on here

madlaz
09-01-2011, 11:15 AM
trying to but have the bow in pieces

Sharxfan
09-01-2011, 11:43 AM
not sure if this helps but here you go.
http://martinarchery.com/mtechforum/showthread.php?8777-Want-to-Lower-Draw-Weight-on-my-2009-Martin-Mystic-HELP-!.
http://www.archerytalk.com/vb/showthread.php?t=885406&page=1

Destroyer
09-01-2011, 02:21 PM
trying to but have the bow in pieces

Can't put it together? :confused:

Sharxfan
09-01-2011, 03:43 PM
Think he waiting on the poundage for the limbs before putting it back together.

cjchasman
09-01-2011, 05:13 PM
This might help still looking for you though...http://www.archerytalk.com/vb/showthread.php?t=1110421&pagenumber=
I think bfisher could help out. You may want to PM him.
Its' so easy to volunteer other people.lol :)

cjchasman
09-01-2011, 05:41 PM
http://martinarchery.com/mtechforum/showthread.php?3664-martin-limbs&p=10423 One more piece of info.

Destroyer
09-01-2011, 06:09 PM
Think he waiting on the poundage for the limbs before putting it back together.

Understood. Just whack it together and see what you end up with. Martins usually don't get any higher than 75# max with 7H and the lighter limb should be 8# lighter. I say should because you never can be 100% sure of the final weight, that's why there is mediums, heavy, etc, so the builder can adjust the final weight.

Bow press or using the limb bolts?

madlaz
09-02-2011, 01:59 AM
oh well its not that hard to change limbs so i will try both and see wich one my sons wife can draw back thanks for the help guys i will start with 3 m

bfisher
09-02-2011, 04:45 AM
This might help still looking for you though...http://www.archerytalk.com/vb/showthread.php?t=1110421&pagenumber=
I think bfisher could help out. You may want to PM him.
Its' so easy to volunteer other people.lol :)

Gee thanks. Put me in the middle of this. When I first saw this post I checked the spec charts and found nothing that would help. That's why I didn't post a reply. In other words, I have no clue. If it were me I'd toss it all together, weigh the bow, and compute what limbs are needed based on what it is and what is wanted. That's how I get most of my knowledge when there isn't anything to go by in the spec charts.

madlaz
09-02-2011, 09:27 AM
One if the biggest problems that martin has aspecialy with limbs most limbs will interchange with theyre bows but there are no specs to tell you what will happen when you do one bow with 3h limbs will be 60 lbs on another might be 70 or 40 so its a trial or error o well its fun to play with if you have deeeep pockets wich i dont have just got to look for bargains who ever said archery is cheap if you get addicted.

bfisher
09-02-2011, 11:18 AM
One if the biggest problems that martin has aspecialy with limbs most limbs will interchange with theyre bows but there are no specs to tell you what will happen when you do one bow with 3h limbs will be 60 lbs on another might be 70 or 40 so its a trial or error o well its fun to play with if you have deeeep pockets wich i dont have just got to look for bargains who ever said archery is cheap if you get addicted.

Yes and no. If you already have limbs on the bow and know what the draw weight range is for them then you should be able to cross reffernce to a different limb deflection and be pretty close. If you don't know how this is done then just ask. That's what we're here for---to help with such matters.

Now if you're starting from scratch that is a different matter. I would say that it would be nice if such info were available on the Tech Charts. Some years they had it and some they didn't.