PDA

View Full Version : Acu-Trak Cam system timing



Monofletch
09-19-2011, 06:25 PM
Is there a way to tell if I have proper rotation and timing on my FC 360?

Thanks in advance!

Destroyer
09-19-2011, 10:37 PM
.................................................: (

Monofletch
09-20-2011, 02:15 AM
No -it's not loud. Well...after I adjusted the SOS it's fine. I was just curious if there was a way to tell if everything was okay. Like timing marks or holes.

Hutch~n~Son Archery
09-20-2011, 11:18 AM
Welcome to the forum, This is were I set mine and it seems to be real quiet and the no vibration from being under or over clocked. It leaves a slight space between the lobe of the cam and the string up to a 1/4" it fine.

4412

Hutch:cool:

gravedigger
09-20-2011, 11:30 AM
i thought at one time i had started a thread about cam timeing for the acutrac but cant seem to find it.i will keep looking.

Monofletch
09-20-2011, 12:39 PM
Another pic---if that helps....

Destroyer
09-20-2011, 12:53 PM
.................................................: (

Hutch~n~Son Archery
09-20-2011, 12:54 PM
Another pic---if that helps....Like what was said before there is no timing for single cams. But there is a sweet spot where the cam is not coming to the end of the cycle and slamming the end of the lobe also on the other hand were it is not come to the end of the cycle and ending to soon. General rule of thumb that Bfisher mentioned to me is a 1/8 to 1/4 inch in between the string and the cam. In my pic it shows a little red line where I am talking about. It will be hard to see since the pic got shrunk.


Hutch:cool:

gravedigger
09-20-2011, 02:21 PM
bigger pic
http://images.imagelinky.com/1316559882.jpg (http://images.imagelinky.com/1316559882.jpg)

Hutch~n~Son Archery
09-20-2011, 02:36 PM
Thanks GD, I too looked for that thread on cam timing I think it disappeared.


Hutch:cool:

Monofletch
09-20-2011, 03:16 PM
If anything I need to advance my cam a couple of twists...or maybe just leave it alone. :D
from as straight as I can get! My bow is 29/70#

Destroyer
09-20-2011, 03:43 PM
.................................................: (

Hutch~n~Son Archery
09-20-2011, 03:50 PM
If anything I need to advance my cam a couple of twists...or maybe just leave it alone. :D
from as straight as I can get! My bow is 29/70#That pic shows that is right on. What might throw you off on my bow is that it is left handed. I can see by the distance from the string to the letter t you are right on. So enjoy the bow it is a good shooter.



Hutch:cool:

gravedigger
09-20-2011, 05:02 PM
Thanks GD, I too looked for that thread on cam timing I think it disappeared.
i think the thred is gone as well

Hutch:cool:


Correct. Stop worrying about the bow and enjoy shooting it. :)

as D and hutch said it is lookinf good and dont worie shoot it till your arm drops

timbow
01-04-2012, 07:55 PM
How did u rotate ur cam by twisting cable or untwisting the string.

Hutch~n~Son Archery
01-05-2012, 12:31 AM
Taking out a couple of twists in the cable and adding 3 to 4 in the string will retard the timing or to say moving the cam toward the riser. In reverse it will advance it toward the string.





Hutch:cool: