PDA

View Full Version : Finally pics



bigredhunter00
09-23-2011, 04:55 PM
44634464446544664462

Heres the lean on my bengal with showing the angle of lean of string, Tried twists also cable slide string angles and string being cut by cable slide

gravedigger
09-23-2011, 04:59 PM
i have a bit less lean then that on my bengal..but not by much.by the way nice scar on the wrist,bet ther is a story behind that

maybe time for the ccs

bigredhunter00
09-23-2011, 05:03 PM
serving is being cut and if theres no serving string gets cut, think string is too short, also scar on wrist.......No matter how fast u go u cannot fly on a bike!

gravedigger
09-23-2011, 05:08 PM
serving is being cut and if theres no serving string gets cut, think string is too short, also scar on wrist.......No matter how fast u go u cannot fly on a bike!

i have had the ccs on my bow for maybe 10 months,no serving and no problem with cutting into string.made my draw a bit smoother and bumped me up 3 lbs.

ouch,thats why i dont ride..no insurance to back up the injury.

bigredhunter00
09-23-2011, 05:11 PM
already did the twists, its a 2010 Bengal, wife has same bow and no problems.

bigredhunter00
09-23-2011, 05:17 PM
ive taken it to a dealer and they measured and said the idler wheel is not leaning. They think string is too short(custom string) and thats whats
"torquing " the the limb a bit

bigredhunter00
09-23-2011, 05:24 PM
a2a is 32.25 and bh is 7 inches

SJunior
09-23-2011, 06:03 PM
Have you checked to see if the idler wheel is bent? My Trophy Hunter had the same angle and had a bent wheel. Take the string off and spin it. Just a possibility.

Hutch~n~Son Archery
09-23-2011, 06:08 PM
BRH, definitely got a good lean by the looks of the pics. My 2010 Bengal doesn't look like it has that much lean. I will have to take a good look at mine and see if I can see anything that will help.



Hutch:cool:

bigredhunter00
09-23-2011, 06:20 PM
4467

Thats looking down from idler wheel limb down to cam limb and the string. notice how the string is against the idler wheel. im thinking that one of the bushings needs an additional space on it.

Hutch~n~Son Archery
09-23-2011, 06:21 PM
BRH, I just looked at mine. Your lean is not that much more than mine. Does your cable slide have the string on the outside groove and in the shortest part of the glide? With the cable in the longest grove. Also I took a lot of lean out by measuring the ata on both sides and matched them by twisting the yoke till they were the same.


Hutch:cool:

Hutch~n~Son Archery
09-23-2011, 06:27 PM
By the looks of that pic the cable slide is equal causing the cable to have excessive pull. My cable slide is grey and has a very long section for the cable.



Hutch:cool:

bigredhunter00
09-23-2011, 07:34 PM
ok update:

Measured from edge of idler wheel to black string 1/2", measured from edge of idler wheel to red string 3/8 inch. i do have idler wheel lean!

polaris754
09-23-2011, 09:11 PM
from the looks of that pix, it seems the cable guide is pulling it way out . just a guess

Hutch~n~Son Archery
09-24-2011, 02:46 AM
Sonny is right on the yoke. Most of the Martins are 7 inch yokes. But the Bengal is 8 inches. So from the end of the loop to the serving it should be 8 inches. If it is not that can change how it pulls the idler over.

Hutch:cool:

bigredhunter00
09-24-2011, 05:18 AM
from what hutch said its 7 inches from serving to end of loop.

Hutch~n~Son Archery
09-24-2011, 05:28 AM
That would be confirming what Sonny said. That yoke is too short and is causing some of the problem.


Hutch:cool:

bigredhunter00
09-24-2011, 03:47 PM
ok thanks for the info pretty soon hutch u will have an order for me since u know martins standards. Just waiting on the money.

Hutch~n~Son Archery
09-24-2011, 03:59 PM
Not a problem, I would like to see that Bengal shoot as smooth as mine. Once you get a set of strings on it, there will be a few adjustments to get the correct specs and you should be right on the money.

Hutch:cool:

bigredhunter00
10-06-2011, 05:29 PM
Ok so had someone look at pics and low and behold............... the cable slide was on backwards. Loosened limbs, flipped the cable slide and whaaaaalaaaaaaaaaa i have full clearence on my string. Well since the only one who messed with it was the guy who put the last set of strings on my bow, i think he needs a kick to the shins. Thank you all who threw ur imput in trying to help me solve my issue. Hutch, sent u and email any ?s give me a
call.