View Full Version : Draw adjustment
10-22-2011, 04:49 PM
OK got new silencer...had bow shop set it at 65# and 27.5 draw...I don't think its right...When I draw there is no noticed left off..It seems there is a soild 65# pull all the back and it never gets easier on the cycle...any feedback????
10-22-2011, 04:53 PM
What numbers are the modules set on? They should both be on the #2 hole, if they are both set correctly then the draw stop is set too short and is stopping the cam rotation before you get to the valley.
10-22-2011, 04:57 PM
If the draw stop is set to short, you wont make it to the vally. Try moving your stop back the other way. If your draw becomes too long, you will need to move your modules to the #1 position.
10-22-2011, 04:58 PM
Yeah, what he said!
10-22-2011, 05:06 PM
just checkeed both screws are in the #1 hole...So what does that mean? The lenght is set longer than what I need...
10-22-2011, 05:12 PM
Well.... i bet you could twist up your bow string a bit, and move your draw stop ane be ok, or just move your draw stop and see how that feels...
10-22-2011, 05:34 PM
Moved the screw to the 2 hole and moved the stop..Feels great now..Shooting 1 !/2" groups at 20 yards..love it.Thanks again..I like being able to do things myself and you guys on this forum have given me the confidence...Thank you again
10-22-2011, 06:25 PM
Something you might keep an eye on is your string against the mods, mine had sharp edges on the inside edge. Simple fix, just round off the edge with a file and sand paper.
Have fun with your Silencer, like mine a lot.
Powered by vBulletin® Version 4.2.2 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.