PDA

View Full Version : help with the bullet x please



Unregistered
09-13-2007, 12:21 AM
Hi,I just got my bullet x and need to adjust the draw length.The
problem is one of the screws on the module is blocked by the limb.

Any ideas on how I can do this?One of the main reasons I got this
one is you didn't need a bow press to adjust it.

Thanks

cdfirefighter1
09-13-2007, 09:13 AM
well... you can back your limb bolts out a bit till you can get to it.. or you can squeeze the cable towards the riser with your fingers and the screw will come out far enough to get to...

deer dude
09-16-2007, 04:22 AM
well... you can back your limb bolts out a bit till you can get to it.. or you can squeeze the cable towards the riser with your fingers and the screw will come out far enough to get to... i backed mine out a bit and did mine this way.would have been a tad easier with a press but it can be done. by the way your going to love the bow.