PDA

View Full Version : Scepter II cam conversion



Harpman
09-21-2007, 10:10 PM
Hello!...I have a Scepter II with Fury "X" cams, and Elite limbs...I have a set of Nitrous cams, size "A"...To change this bow from Fury X cams, to Nitrous "X" cams,cams, what bow string lenght, and cable length wil I need??...Also, if anyone has done this, what kind of speed changes will I get, if any at all?...Thanks in advance....Harpman

Robert58
09-22-2007, 11:07 AM
My Scepter II is set up with Nitrous A Cams and Mini Mods with cable guard.

55 1/2" shooting string

44 3/4" cables.

43 1/2" ATA

8 5/16" BH to center of string

Robert

Harpman
09-22-2007, 12:48 PM
Robert...thanks!...Have You done any chronographing of this set up??..Also, since You have "A" cams, and Mini-Mods, what is Your draw length adjustments with this cam setup??Thanks again...Harpman

Robert58
09-22-2007, 02:10 PM
I am in the second hole at 25 1/2" AMO draw.

I have not chrono'd my bow. But I am probably shooting in the low 230's with a 320 grain arrow at 52 lbs. I am backed off 2 1/2 turns on the limb bolts with 6L Elite limbs.

Robert