PDA

View Full Version : I'm back!



Arrow Splitter
12-18-2011, 11:45 AM
My first college semester is over, so now I'll be around here a little more.:cool: I got to hunt only about 3 times this year due to school and work, but it will be worth it in the end.

A.S

bfisher
12-18-2011, 12:24 PM
Welcome back AS. So how is school going? Glad to see you have your priorities straight. You can bet that not being able to hunt as much as you'd like right now, but hitting the books, will pay off down the road. Tell us how school is going.

Arrow Splitter
12-18-2011, 12:34 PM
School is going well. I haven't seen all my final grades yet, but I do know that they're fine. In Algebra/Trigonometry, which was definitely my hardest course this semester (and will probably be hardest overall) I got a B- overall. I'm glad that course is done. I'll have to get some pictures posted on here of what I've made in my machining class.

A.S.

HawgEnvy
12-18-2011, 01:36 PM
good to have ya back,Brad. Glad to here you're doin good in school. ready for the pics anytime

Hutch~n~Son Archery
12-18-2011, 02:58 PM
Gee guys, what about me! I have to put up with him now!! I could rent him out days!!:rolleyes:





Hutch:cool:

bfisher
12-18-2011, 04:54 PM
Gee guys, what about me! I have to put up with him now!! I could rent him out days!!:rolleyes:





Hutch:cool:

No way Jose. Been there and one the college payment thing with two; actually two in school at the same time for a 2 year stint.

Brad, it's good to hear you're doing well. Make your dad proud.

elkslayer4x5
12-18-2011, 07:00 PM
Gee guys, what about me! I have to put up with him now!! I could rent him out days!!:rolleyes:





Hutch:cool:

Just think of how much 'you'll' get done while he's home. :D
Glad you're back, A S. :)

MLN1963
12-18-2011, 07:29 PM
Welcome back A.S.

Money Man
12-18-2011, 07:40 PM
Glad, your back but do you know how difficult it was to not look at your equation at the bottom and try to figure out that i=2

Arrow Splitter
12-19-2011, 05:12 AM
Glad, your back but do you know how difficult it was to not look at your equation at the bottom and try to figure out that i=2That's incorrect, V=square root of 2.:D:p Yes, I'm sure it was very difficult to not figure those equations.LOL



Thanks guys.

Money Man
12-19-2011, 05:22 AM
That's incorrect, V=square root of 2.:D:p Yes, I'm sure it was very difficult to not figure those equations.LOL



Thanks guys.

I never even saw the other side of your signature. Thanks.

elkslayer4x5
12-19-2011, 05:32 AM
So lets see what you've done in your machining class. ! :)

Arrow Splitter
12-19-2011, 05:38 AM
So lets see what you've done in your machining class. ! :)I just happened to be taking pictures while you replied. Here you go:5233523452355236
The first two are the Kurt vise handle, and the second two are the nut for the collet stop.

gravedigger
12-19-2011, 05:45 AM
welcome back.heck ya sounds like your all in to your schoold work.as everone said befor me,keep at and it will be over soon enough.good to have ya around even if it is for a short time.;)

Arrow Splitter
12-19-2011, 05:52 AM
welcome back.heck ya sounds like your all in to your schoold work.as everone said befor me,keep at and it will be over soon enough.good to have ya around even if it is for a short time.;)Thanks GD. You'll be seeing me around frequently for about a month or so.:cool:

alex
12-19-2011, 06:05 AM
Very well done, AS!

Arrow Splitter
12-19-2011, 06:10 AM
Very well done, AS!Thanks Alex.

Anyone need a new riser?:cool:

Spiker
12-19-2011, 06:21 AM
You have probably seen this but if not: http://www.archerytalk.com/vb/showthread.php?t=1630202

ElkSlayer
12-19-2011, 06:25 AM
Thanks Alex.

Anyone need a new riser?:cool:

nice work brad ... but your a ways from making a riser...lol

Heck i even knew what the parts were berfor reading it ..lol nice handle BTW.
congrats on surviving trig class no go ahead and forget most of it... they make a book full of that info.. did you get one yet. maybe after x mass is a better time to ask

OH and I see your calipers are knocked off ... Droped mine one day and after ten years and now they are .005 of tdc.... uggggg cant fix it..
you can fix your, if it is off enough, all that happend ,the gear jumped a tooth on the rack. should habe a brass pin to push down on gear and then close calipers release gear and hopefuly back to tdc

Arrow Splitter
12-19-2011, 06:51 AM
You have probably seen this but if not: http://www.archerytalk.com/vb/showthread.php?t=1630202Thanks for the link Spiker. I do hope to design and build my own bow someday.

Arrow Splitter
12-19-2011, 06:58 AM
nice work brad ... but your a ways from making a riser...lol
Yeah, I know.:D


Heck i even knew what the parts were berfor reading it ..lol nice handle BTW.
congrats on surviving trig class no go ahead and forget most of it... they make a book full of that info.. did you get one yet. maybe after x mass is a better time to ask Thanks. I haven't got the Machinist's Handbook yet. Maybe when I have more of that stuff called money.LOL


OH and I see your calipers are knocked off ... Droped mine one day and after ten years and now they are .005 of tdc.... uggggg cant fix it..
you can fix your, if it is off enough, all that happend ,the gear jumped a tooth on the rack. should habe a brass pin to push down on gear and then close calipers release gear and hopefuly back to tdcThey actually were off since new. Of course, they aren't exactly expensive.
I don't see the brass pin you're talking about.:confused:

ElkSlayer
12-19-2011, 07:00 AM
They actually were off since new. Of course, they aren't exactly expensive.
I don't see the brass pin you're talking about.:confused:

thats no good did it come with a case... should be a small pin has a bent square end ...look at the top edge by dial...do you see a small hole?

Arrow Splitter
12-19-2011, 07:02 AM
Hold on, I'll post pics of what I can see.....

ElkSlayer
12-19-2011, 07:07 AM
lol me too...

Arrow Splitter
12-19-2011, 07:10 AM
52375238 Sorry about the quality of the first one. Those are slotted head screws.

ElkSlayer
12-19-2011, 07:13 AM
5239

Brad you see the channel on the back of my dial... Pin goes in to push gear off rack my are off .004 not enough to fix.. you can use a paper clip if you do not have the pin

ElkSlayer
12-19-2011, 07:15 AM
the sloted screws are for tension...ajusts the slide play in the jaws.. look at the pic I took see the slot...do you have one and just how far off are they

Arrow Splitter
12-19-2011, 07:24 AM
Hold on, camera problems.

ElkSlayer
12-19-2011, 07:26 AM
what .. you kids....lol hahhaha

Arrow Splitter
12-19-2011, 07:34 AM
Had to find batteries...... 5240 It doesn't seem to have the same slot.

Arrow Splitter
12-19-2011, 07:35 AM
You'll have to excuse me, I have to do a few things. I'll be on again later today. Thanks for the help so far.

ElkSlayer
12-19-2011, 07:39 AM
bottom ? or pull the locking knob see if it goes threw? that be the differance between $30 and $130.. lol How far are they off..a few .001 or is it .01

ElkSlayer
12-19-2011, 07:43 AM
any time brad glad to help with tools aswell as Bow n arrows

Don B
12-19-2011, 12:19 PM
Welcome back AS.
I have a Machinery's handbook, 17th edition you can have if you want it, you pay the shipping.
Don.

Arrow Splitter
12-19-2011, 12:45 PM
Thanks Don. You have a PM.

Don B
12-19-2011, 03:23 PM
Archers helping archers....even when it's not archery related...:cool:
Don.

Speedykills
12-19-2011, 03:31 PM
How time fly's,i remember the car post,,,,been awhile....i think that was you anyway welcome back.

Arrow Splitter
12-19-2011, 03:38 PM
bottom ? or pull the locking knob see if it goes threw? that be the differance between $30 and $130.. lol How far are they off..a few .001 or is it .01I'll have to try to take them apart. They did come with a case, but you get what you pay for.:rolleyes: My professor adjusted them and they're accurate, but the dial has to be turned to make them accurate. With the dial in its correct position, they're about 5 thousands off.

Arrow Splitter
12-19-2011, 03:41 PM
How time fly's,i remember the car post,,,,been awhile....i think that was you anyway welcome back.Thanks SK, and yes, that was me. I've already put over 7,000 miles on my car since May.:eek:

Don B
12-20-2011, 05:15 AM
Brad,
I will get your books out to you today after work.
Don.

Arrow Splitter
12-20-2011, 05:44 AM
Brad,
I will get your books out to you today after work.
Don.Thanks Don.:)

ElkSlayer
12-20-2011, 06:20 AM
now see there you go, got a book now ...lol mine is a 15th lol all its missing is the new tool tech... covers way more then none thou..lol

no need to rip em apart if it is only .005 your in the same boat...no fixing unless you realy want to try and then maybe - maybe not:cool: