PDA

View Full Version : Need info again



Lone Wolf1
12-18-2011, 04:00 PM
I was waiting for Slayer x, 08 limbs 13 inch and receive 14 inch.Can i use them to replace the 13 inch if i use the appropriate cable and string with the CAT2 cams.

I have a set of Nitrous x B cam can i fix them with cables and string.

Where i can find theese specs? (cables and string lenght?
It's 2H limbs what the draw weight and brace i'LL obtain with the 2 different cam?
It's a lot of info if somebody can help me I'll appreciate.
Thanks

elkslayer4x5
12-18-2011, 06:46 PM
I was waiting for Slayer x, 08 limbs 13 inch and receive 14 inch.Can i use them to replace the 13 inch if i use the appropriate cable and string with the CAT2 cams.

I have a set of Nitrous x B cam can i fix them with cables and string.

Where i can find theese specs? (cables and string lenght?
It's 2H limbs what the draw weight and brace i'LL obtain with the 2 different cam?
It's a lot of info if somebody can help me I'll appreciate.
Thanks

Have a set of 2M 13" limbs off my 2nd 06 Slayer, got about 46# with C X nitrous, B's would be about 5 -8#'s more.

bfisher
12-19-2011, 05:48 AM
I don't think you're going to find the 14" limbs compatable with the Cat2 cams. If you take notice there are sexbolts (rivets) through the ends of the limb forks of the limb forks for those bows that use the Cat/Nytro cams. There is a reason for this. These cams create a lot more energy due to a harsher draw so the limb tips must be reinforced. If the 14" limbs don't have this reinforcing then there is a real possiblity that the limb tips would split or delaminate where the axles are installed.

You should be able to use the Nitrous X cams as this was a standard setup beginning in 2004. The 14" limbs will give a higher brace height, longer a2a, and a little less speed, but are still a good cam on this bow.

Lone Wolf1
12-19-2011, 10:14 AM
Thanks for the info Elk slayer. Bfisher your'e right. Martin send me an E-mail this afternoon ( 14 limbs will not be compatible with your bow ask your dealer to contact us ) great service Martin.I'll wait .Thanks for the answer.