PDA

View Full Version : Martin Phantom with Fusion cam



alanspse1
01-04-2012, 12:26 AM
I need a module for a 2001 fusion cam on a Phantom magnum. Does your part # 3056 fit my bow? Thanks Alan

Hutch~n~Son Archery
01-04-2012, 12:33 AM
Welcome to the forum Alan, if you go to any Martin dealer you can get a Module for that bow. They usually will swap you out one for the right size you need. If you want your own, ebay http://www.ebay.com/itm/Martin-Single-Cam-Draw-Length-Modules-New-/300636872810?pt=LH_DefaultDomain_0&hash=item45ff5aa06a


Hutch:cool:

Money Man
01-04-2012, 03:40 AM
If you want to order a whole set from Martin it will cost you about $13.