View Full Version : Fuzion One Cam F5 Module adjustment
11-09-2007, 12:44 AM
Im shooting the M-50 Altitude, Fuzion Cam, with the F5 Draw Module. The module has three post, each #1-#3) Can anyone tell me what the draw length adjustments are, and the measurement incriments are, ie 1" or 1.5" for this module.
11-14-2007, 07:18 PM
If I remember correctly the 3 pegs that are on the cam will either set your draw at the specified length of the module which would be 28" for the F-5 or lengthen or shorten it by 1/2" depending on whaich one you move it to. If your string is on the middle peg it would be 28", if it is on the 1st peg it would be 28.5" and if it was on the last peg it would be 27.5". the last peg meaning the one further around the cam from the center one. Hope this make sense.
Powered by vBulletin® Version 4.2.2 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.