View Full Version : Tuning a Nemesis
02-29-2012, 05:38 AM
Been finally getting to tryin to get my Nemesis going for a little spring hog hunting on some private land. Seems mine is tuning a little wide, about 1 1/16". From the guys I have talked to on AT, that seems kind of weird to them, they say it should tune a little inside. Also, I got Axis 340s for it, and cut them to 28.5" on the carbon with 100gr points per OT2. Are those what I need or should I consider the Axis 400s instead. Setup is in the sig.
02-29-2012, 06:01 AM
You could probably shoot a 400 spine, but you've already spent the money for 340's so don't fret about it. If they tune OK then go ahead and shoot them. And don't worry about where the rst has to be set. There's nothing written in stone. That's what tuning is all about. Just have fun with it and hope you get some bacon.
02-29-2012, 06:26 AM
Good deal, do you think it will BH tune a little easier with 400s, I haven't tried with the 340s yet.
02-29-2012, 08:21 AM
Just from experience? I'd shoot the 340's with broadheads and see what happens. Maybe you could borrow a couple 400's from somebody and try them. Worst case scenerio you could shoot the 340's with 125 gr broadheads for a little more weight forward. Like I said, you already have the 340's so give them a try before spending any more money.
02-29-2012, 09:11 AM
Getting 400s isn't a problem, but I'll give the 340s a try.
02-29-2012, 11:36 AM
Just a little hint, but I like your screen name. And on that subject keep an eye on the screws holding the modules to the cams. They have a habit of working loose. Wouldn't hurt to use some 242 Loctite on them.
02-29-2012, 11:53 AM
Will do, thanks!! Got a couple FMJ 400s and a few Axis 400s to try!! Thanks, I'll let you know how they do!
02-29-2012, 01:52 PM
Haven't put any broadheads on them yet, but the FMJs are shooting awesome as always!
03-02-2012, 04:19 PM
Just checking back, got a couple FMJ 400s, paper tuned, and my ST Mags stripped the vanes off of the other arrow first shot!!!!!! Thanks, man!!!!!!
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.