PDA

View Full Version : Easton Fullbores or Fatboys.



Double S
03-10-2012, 01:42 PM
I'm thinking about trying either the Easton Fullbore or Fatboy shafts. 350 g uni with a 200 grain glue in point for indoor spots. 55 pounds with a 28.75 arrow shaft. On Target 2 tells me I'm good to go but anybody here have any fist hand experience with these shafts?.


595759585959

SJunior
03-11-2012, 05:01 AM
Been shooting Fatboys, they shoot great. No experience with th Full Bores.

bfisher
03-11-2012, 08:52 AM
Don't worry too much about spine for shooting a fixed yardage. I have been shooting a GT 22 series (300 spine) with 155 gr tips (Insert + 125 gr point) at 27" and 42# all winter long. By the charts this doesn't spine right for me until about 75#, but who cares about the charts. They group. Personally, I would go with the bigger diameter between the two.

Double S
03-11-2012, 09:15 AM
Thanks guys. I was double checking my OT-2 specs after updating the 2012 specs for the Scepter. It's showing that i"m a little on the weak side with the 200 grain points. It's showing that I should go with the 150 grain points. with the 350 shafts. That's the consensus I'm getting fro most. What Nock should I go with, the G Uni or S uni. Is one better than the other?
I'll be using 28.75 Shafts with a 55 DW.
Thanks for the assistance.