View Full Version : 2010 Martin Panterra string lengths

03-31-2012, 03:52 AM

Just built and replaced the string on a friends Pantera. Just wondering if anyone has some experience with these. Buss is exact to spec and the main string is about an 1/8" short of 90" and the bow is way off spec. A2A is under 32", bh 7" and should be 32.25" and 7.25". Draw length is coming in at 28.5" and I believe it has the F4 module which according to the website is for a 29" draw. The original string came off at 90.25" and the bow was much closer to spec, but still a little short on a2a. Does Martin measure there strings at the standard 1/4" posts and 100lbs?


Hutch~n~Son Archery
03-31-2012, 04:11 AM
Welcome to the forum Southsask204, according to my specs the string is 90" and the cable is 34.25
You mentioned the cable is 32.25 that would be the problem.


03-31-2012, 04:35 AM
I threw a ton of numbers in that post. The 32.25 is for the axle to axle.

Even with the string that came off the bow at 90.25 it was still short on A2A. I'll take a look at it again tonight when I get home. Just curious if there was anything obvious that I missed. I haven't spent much time with single cam bows so it's time to learn something new.

Hutch~n~Son Archery
03-31-2012, 05:51 AM
The cable is what mainely going to effect the AtA. So unless the specs are messed up on the spec sheet. I wouldn't know what it is.