PDA

View Full Version : Help with new user/new (used) bow - Jaguar Magnum



clarklt
05-05-2012, 01:32 PM
Just purchased a used Martin Jaguar Magnum bow and need to change the draw length - the manual on the Martin site does not match my bow - if someone can help me identify my bow and tell me when modules(?) I need to shorten the draw length - NOTE: The bow has a "6" module on it now.

I have attached a few pix to help with identification.

Thanks so much - looking forward to getting started - haven't bow hunted in 35 years.

GOD SPEED

Spiker
05-05-2012, 02:59 PM
Each module will change the draw length by 1".
The F6 module thats on it would be for a 29" dl.
The F5 module is not used on the Jaguar so to decrease it 1" you would need the F4 module.
Here is a link to the string/mod chart that shows your bow:
http://www.martinarchery.com/chart/2003chart/f_zmod-string.html

bowgramp59
05-05-2012, 05:57 PM
the jaguar that i had , had a m-pro cam you just changed to the right numbered mod. that one you have might be a draw length specific cam . someone on here may be familiar with that fuzion cam. i bet archer7 or bfisher will know.

clarklt
05-05-2012, 06:33 PM
Each module will change the draw length by 1".
The F6 module thats on it would be for a 29" dl.
The F5 module is not used on the Jaguar so to decrease it 1" you would need the F4 module.
Here is a link to the string/mod chart that shows your bow:
http://www.martinarchery.com/chart/2003chart/f_zmod-string.html

THANKS MUCH - THAT HELPS A LOT. Does anyone know where I might find a manual for this bow?

TEN RING
05-05-2012, 07:22 PM
If you cant find a module you can short it by moving your string from post 1 to post 2 or 3 and see how much that gets you

MartinMan
05-05-2012, 09:21 PM
Did some research,

It uses modules but you have to have a press if it is like the Martin Jaguar Magnum. Modules are available in 1" increments and you can fine tune the dl by changing which post the string is attached to, 1 being the longest and 3 shortest setting for that module.

This is a link to the draw mods, the last year for the fusion cam was 2003.

http://www.martinarchery.com/2010web/chart/2003chart/f_zmod-string.html

Spiker
05-05-2012, 10:43 PM
THANKS MUCH - THAT HELPS A LOT. Does anyone know where I might find a manual for this bow?

Here is the link to the manual you need.
You can just save it or download and print it.

http://www.martinarchery.com/manuals/2002_Martin_Compound_Bow_Manual.pdf