PDA

View Full Version : 08 MOAB Specs and cam timming!



Elk4me
12-19-2007, 06:19 AM
I recently got a 08 MOAB almost 2 weeks ago now! My Question is the string and cable specs on my bow say 90" and 34 1/4" on my limb Sticker according to the Tech pg they should be 92.5" 35.5". I have a brace height of 7 3/8" also and 32 3/4" axel to axel, should be 7" BH and 33" ATA. Now it appears also the cam is under rotated compaired to my Cheetha! Look at the pics Below.

Moab cam:
http://i18.photobucket.com/albums/b116/Elk4me/P1010008-1.jpg
Cheetha cam:
http://i18.photobucket.com/albums/b116/Elk4me/CheetahM-Pro.jpg

I have called and played phone tag for 2 days and today is gona be day 3. Anyone else have this problem.:cool:

Elk4me
12-19-2007, 04:54 PM
:D I talked to Scott and Joel today on the Matter today . Also the bow is in Spec with a BH of 7 3/8" and ATA 32 3/4" Also Proper String is 90" and 34 1/4". Also cam rotation is proper I just measured and get 3/4" OF STRING TRACK GROOVE EXPOSED FOR PROPER CAM ROTATION ON THE 08 M-PRO. Unlike the 1/10 " track groove needed on a 07 M-Pro.

kattman
10-11-2009, 03:10 PM
:D I talked to Scott and Joel today on the Matter today . Also the bow is in Spec with a BH of 7 3/8" and ATA 32 3/4" Also Proper String is 90" and 34 1/4". Also cam rotation is proper I just measured and get 3/4" OF STRING TRACK GROOVE EXPOSED FOR PROPER CAM ROTATION ON THE 08 M-PRO. Unlike the 1/10 " track groove needed on a 07 M-Pro.



PM sent about tuning

alex
10-12-2009, 09:42 AM
Elk4me, your bow is ok, mine is the same, just the track groove is a little shorter.. I wouldn't trust the tech page very much ;) Good luck with the MOAB, hope you like it as much as i do.

Montalaar
10-12-2009, 10:20 AM
Alex, this thread is nearly two years old.. :P

alex
10-12-2009, 10:26 AM
:mad: :eek: :o Hmm, how these new guys find these threads? I usually check the dates, but this time was in a hurry...for my dinner.