PDA

View Full Version : Questions about Hybrix cams ??



ftshooter
06-04-2012, 05:43 PM
How do you tell if they are 1.5 or 2.0 cams? I have a 09 Aillen X it is 27-30 draw right? How can I make it a 26 inch draw or can it be done? Thanks...

Speedykills
06-04-2012, 07:11 PM
Good question!

bfisher
06-04-2012, 07:57 PM
don't think it's srandard fare and would have to be custom ordered, but with Hybrix 1.5 cams the draw length would be 26" to 28"---maybe not exact. but very close. One way to varify this is to look at the 2011 FireCat 400 specs. The bow is a half inch longer or so, but the catalog shows a draw of 25" to 28" with the Nitro 1.5 cams, which are mechaniclly identical to the Hybrix.

If you're planning a switch don't forget that you may have to change limbs, too. Draw weight will be about 8# to 10# heavier going from the 2.0 to the 1.5.

Spiker
06-04-2012, 08:49 PM
The top pic is the 1.5 - the second pic is the 2.0.
You will also need a 49.5" string. The cables remain the same but as Barry said - draw weight will change.
6625

ftshooter
06-04-2012, 09:14 PM
Thanks, guys....the pic help a lot they are 2.0 for sure ....It don't sound like it will be worth the trouble...Well I got a 70lb 09 Aillen X for sale or trade .Need a 60lb 26 inch draw of some kind ..pic is in classifieds ..Thanks again...

Speedykills
06-04-2012, 09:54 PM
Thanks, guys....the pic help a lot they are 2.0 for sure ....It don't sound like it will be worth the trouble...Well I got a 70lb 09 Aillen X for sale or trade .Need a 60lb 26 inch draw of some kind ..pic is in classifieds ..Thanks again...

Hey if you ever run into a bow with cat cams like mine,they will do 26-30" draw length,good luck.