PDA

View Full Version : Lowering limb poundage before pressing martin bows



rdhj
08-02-2012, 08:23 PM
I got my first press and will attempt to adjust my peep alignment....the guy i bought the press from said to check with the manufacturer on how to press and that some bows may need you to decrease the poundage...can anyone tell me if you need to do this with my onza3 ...the manual doesnt say anthing...have the bow on 60# now

Hutch~n~Son Archery
08-02-2012, 08:36 PM
First thing you do know you don't need a bow press with a martin. If you knew that then next step. It is good practice to lower poundage. But that being said I don't always when adjusting the peep. It is simpler to adjust when at the correct shooting weight.





Hutch:cool:

rdhj
08-02-2012, 08:46 PM
yeah, i knew that you could just lower the limbs, but that takes too long and i have hoyts too ;)

about adjust the peep..how many turns on the top cam could you go before timing gets messed up...my peep is about 45 degress facing to the left so i loosened the string at the top one full turn...it seems closer but not dead centered yet...thinking of trying one more 1/2 turn

skidge
08-02-2012, 09:22 PM
Your timing will not change by adding/subtracting twists in string, just cables. ur cables drive the cams. if this is ur first martin, now that u have a press, do yourself a favor and take the strings and cables off and measure them. u can trust manufacturers all u want but always verify.

rdhj
08-02-2012, 10:18 PM
good to know...learning something new every day....is there anything you can do when a string needs a quarter turn to align the peep....subtracting one more 1/2 twist puts my peep a little off the opposite side....guess this is where you adjust it with the d loop?

daiwateampenn
08-02-2012, 11:51 PM
good to know...learning something new every day....is there anything you can do when a string needs a quarter turn to align the peep....subtracting one more 1/2 twist puts my peep a little off the opposite side....guess this is where you adjust it with the d loop?


well i no expert in tie peep or setting the peep dead center. but i still able to get my peep dead center, after hours or experiment, especially if your bow is not shoot at max out all the time.
This is wat i did. i try add 1/2 on top, if its still not center. i try subtract 1/2 earlier on. and add at the bottom string. Well, it does work out on me. u can give a try, and im sure some other bro will advice you on this. and yes, the d-loop have to be consistant with the peep, else, your peep will end up side way at full draw.

happy shooting.

rdhj
08-02-2012, 11:58 PM
well i no expert in tie peep or setting the peep dead center. but i still able to get my peep dead center, after hours or experiment, especially if your bow is not shoot at max out all the time.
This is wat i did. i try add 1/2 on top, if its still not center. i try subtract 1/2 earlier on. and add at the bottom string. Well, it does work out on me. u can give a try, and im sure some other bro will advice you on this. and yes, the d-loop have to be consistant with the peep, else, your peep will end up side way at full draw.

happy shooting.

do you need to twist in opposite directions for top in bottom to get the peep to go in the same direction...i subtracted on top and bottom...is that wrong?

wscywabbit
08-03-2012, 01:08 AM
twisting the string is not the only way to set your peep... For some you can just "train" it by continually twisting the peep at every shot. Eventually it will learn where to sit. However it takes patience lol.

You can also set it by trading strings from one side to the other... If it's a two slot, take one string from the right and rotate it around the back to the left, then take a string from the left and rotate it around the front to the right, repeat until the peep sits straight. Same process with the peeps that have 3 or more slots. Remember just because your strings may have 2 different colored string sets, doesn't mean the peep needs split between the two, just that it has the same number of threads on each side!

daiwateampenn
08-03-2012, 03:05 AM
do you need to twist in opposite directions for top in bottom to get the peep to go in the same direction...i subtracted on top and bottom...is that wrong?

you can start off with a point where u dont do two things in one time. try top, if it doesnt work, reset, and try bottom.

bro wabbit has suggested a good infos... sometimes u need to balance up the number of strand of the string..

Hutch~n~Son Archery
08-03-2012, 03:59 AM
Well everyone, with a well built string you should not have any peep turn, rotation or any kind of movement. Once you settle your string in, you adjust your string buy however many turns it takes to align it into the correct position. Thus when the bow is at rest the peep should be straight back in normal position. When you draw it should stay in normal position.



Hutch:cool: