PDA

View Full Version : im new to compound bows



huntinNed 09
01-15-2008, 07:59 PM
i have a jaguar that was made in 1997 and i need to know how to find out how to find the cable and string length. any help would be appriciated

bfisher
01-15-2008, 08:26 PM
Call Martin customer service @ 1-800-541-8902. Ask for Jake or Joel. If anybody can give you what you need it's one of these guys.

If you can, have ready the Model, year, and cam type. Serial # if you have it. The more info you give them the easier it will be to get it right.

By the way, I checked everything I could on this site, but to no avail.

huntinNed 09
01-15-2008, 11:22 PM
it's a 2 cam is that the cam type

bfisher
01-16-2008, 10:21 AM
No, but it might suffice for Joel. Martin has made many cams over the years, but they may have only made the one dual cam setup that year. Joel should be able to help you. Him or Jake.

That was a long time before I went on board with Martin so I have little to no knowledge of their previous bows. Just trying to steer you to the right people at this point.

Good luck.

huntinNed 09
01-16-2008, 04:40 PM
the cams say Z75+ might this be it. also i've made recurve strings before is it the same as making this type of string , and as for the peepsight how do I install one?

bfisher
01-16-2008, 08:31 PM
Ned,

Not trying to put you off, but you just might get the info you need over on www.archerytalk.com. The site is owned and operated by Martin and there are a lot of savvy individuals on there, including a lot of string makers. They might be able to help you more than I.

huntinNed 09
01-22-2008, 09:37 PM
thanks for the info i was able to find all of the info