PDA

View Full Version : exile limb swap



beadrunner
10-17-2012, 05:06 PM
Will 2010 exile and shadowcat limbs interchange. I'm looking at a shadowcat for my daughter and I need lighter limbs, or how much would they cost

bfisher
10-17-2012, 09:05 PM
They should be interchangable. You need to post more detail and be specific, thus we can make particular recommendations.

beadrunner
10-17-2012, 09:21 PM
Could I get a 45-60 shadowcat down to 42 lbs

elkslayer4x5
10-18-2012, 07:52 AM
You can turn the shadowcat down to 42#s, but it may feel a bit 'spongy', and may not perform as efficiently as it did at peak draw weight. The last price I heard for new limbs was about $200.00. A better deal is possible if you call Dave Barmsdale , I think that you can get a set of limbs for about $150.

http://www.barnsdalearchery.com/

For used limbs check on Archerytalk classified ads--Accessories and General Hunting Items--Strings, cams, modules and limbs then searchforum-- Enter Martin and you'll get this page. There a guy who has several set of Martin limbs, but its an older post, might still some of them...Good luck.:)

http://www.archerytalk.com/vb/search.php?searchid=16813041

beadrunner
10-18-2012, 08:38 PM
Scratch the shadowcat........ I just bought an Alien Nemesis :D 45-60 now I've got to get some 35-50 limbs.
I lost some ATA and brace height but I was worried about the weight and I got a good deal

elkslayer4x5
10-19-2012, 07:25 AM
CAll Dave........:)


http://www.barnsdalearchery.com/

Ehunter
10-19-2012, 07:32 PM
I just bought a set of Barnsdale's a few months ago. $150 shipped. Put them on a Warthog. Only problem we ran into is, we had to do some changing around to figure out the right deflection. Took the 70# limbs off an Alien I have, and put them on the Hog. Topped out at 55#. So instead of the 115 deflection limbs I have on the Alien, he had to make me a set of 85 limbs. Tops out right at 72#.

Spiker
10-20-2012, 12:55 AM
Scratch the shadowcat........ I just bought an Alien Nemesis :D 45-60 now I've got to get some 35-50 limbs.
I lost some ATA and brace height but I was worried about the weight and I got a good deal

If your Nemesis has the 2.0 cams you will need 155 limbs to give you 35-50#.
If it has the 1.5 cams then you need the 175 limbs for 35-50#.
If your interested in a trade - I have a set of the 155's Carbon Fiber Rytera (Barnsdales) that I would swap (if yours are the carbon 135's).

beadrunner
10-20-2012, 05:39 AM
If your Nemesis has the 2.0 cams you will need 155 limbs to give you 35-50#.
If it has the 1.5 cams then you need the 175 limbs for 35-50#.
If your interested in a trade - I have a set of the 155's Carbon Fiber Rytera (Barnsdales) that I would swap (if yours are the carbon 135's).

The bow will be here next week I'll let you know which one they are

elkslayer4x5
10-20-2012, 06:55 AM
Sounds as if this is going to work out great for you beadrunner and Spiker. I love this board. :)

beadrunner
10-26-2012, 08:49 PM
If your Nemesis has the 2.0 cams you will need 155 limbs to give you 35-50#.
If it has the 1.5 cams then you need the 175 limbs for 35-50#.
If your interested in a trade - I have a set of the 155's Carbon Fiber Rytera (Barnsdales) that I would swap (if yours are the carbon 135's).

Still waiting for the bow to arrive

beadrunner
10-30-2012, 06:32 PM
If your Nemesis has the 2.0 cams you will need 155 limbs to give you 35-50#.
If it has the 1.5 cams then you need the 175 limbs for 35-50#.
If your interested in a trade - I have a set of the 155's Carbon Fiber Rytera (Barnsdales) that I would swap (if yours are the carbon 135's).

They are carbon 1mp