PDA

View Full Version : Diy Bow vise!!



Hutch~n~Son Archery
02-17-2013, 08:11 AM
Build away its cheap and holds the bow well enough that I can center serve it.
I used 2 short pieces of angle iron. These go on the c clamp.
2 short pieces of angle iron
2 pieces of 3/4" square tube
2 bolts and nuts approx 3/8" x 6" (not sure)
5/8" x 12" steel rod
3" C clamp
Stick on felt pad

http://www.archerytalk.com/vb/attachment.php?attachmentid=1547788&d=1355970311
http://www.archerytalk.com/vb/attachment.php?attachmentid=1547789&d=1355970344
http://www.archerytalk.com/vb/attachment.php?attachmentid=1547790&d=1355970376
http://www.archerytalk.com/vb/attachment.php?attachmentid=1547791&d=1355970417



I am going to get new felt pad and glue it one and its done.



Hutch

Mike G
02-17-2013, 08:43 AM
Nice!!

I was just telling my buddy that I could weld him up a bow vise cheap. This will make it easier for me, instead of trying to figure out how to go about it.

Thanks.
Mike

Mike G
02-17-2013, 08:46 AM
I just realized; looking at your bow; that you are also a lefty. I didn't know that or never paid attention to it before now!

elkslayer4x5
02-17-2013, 09:09 AM
Build away its cheap and holds the bow well enough that I can center serve it.
I used 2 short pieces of angle iron. These go on the c clamp.
2 short pieces of angle iron
2 pieces of 3/4" square tube
2 bolts and nuts approx 3/8" x 6" (not sure)
5/8" x 12" steel rod
3" C clamp
Stick on felt pad

http://www.archerytalk.com/vb/attachment.php?attachmentid=1547788&d=1355970311
http://www.archerytalk.com/vb/attachment.php?attachmentid=1547789&d=1355970344
http://www.archerytalk.com/vb/attachment.php?attachmentid=1547790&d=1355970376
http://www.archerytalk.com/vb/attachment.php?attachmentid=1547791&d=1355970417




I am going to get new felt pad and glue it one and its done.



Hutch

Nice photos, if you like small boxes with red X's in 'em.

Sonny Thomas
02-17-2013, 03:42 PM
Same here. Red Xs in tiny boxes.

Hutch~n~Son Archery
02-17-2013, 04:17 PM
Same here. Red Xs in tiny boxes.

Don't know what to tell ya! I see them and Mike G sees them.




Hutch:cool:

Hutch~n~Son Archery
02-17-2013, 05:10 PM
Build away its cheap and holds the bow well enough that I can center serve it.
I used 2 short pieces of angle iron. These go on the c clamp.
2 short pieces of angle iron
2 pieces of 3/4" square tube
2 bolts and nuts approx 3/8" x 6" (not sure)
5/8" x 12" steel rod
3" C clamp
Stick on felt pad


7676767776787679


Hutch:cool:

droppixel
02-17-2013, 05:43 PM
I just realized; looking at your bow; that you are also a lefty. I didn't know that or never paid attention to it before now!

It's called "wronghandedness" it's a horrible disease that a certain portion of the population has ... something that will never go away! ;)

Sonny Thomas
02-17-2013, 08:20 PM
They showed with your second posting of them. Huge, but showing. What'd ya do different? I seen those boxed red Xs in other replies and me Email and couldn't get them to show.

wscywabbit
02-17-2013, 09:10 PM
Nice vise, I may have to make one! Thanks for sharing :)