PDA

View Full Version : Module screw loose



Durandal
04-18-2013, 10:03 AM
One of the screws on the lower cam module keeps geting loose. I've managed to stay on top of it but I'm worried that while out in the great outdoors, the screw might fall off and well... I'm not looking for that small of a screw in the woods!

So, any suggestions? Some at the local archery club have recomended using a medium strenght glue.

Thanks!

alienshooter
04-18-2013, 10:12 AM
One of the screws on the lower cam module keeps geting loose. I've managed to stay on top of it but I'm worried that while out in the great outdoors, the screw might fall off and well... I'm not looking for that small of a screw in the woods!

So, any suggestions? Some at the local archery club have recomended using a medium strenght glue.

Thanks!
I was told to use the blue lock tight, not the red! My rytera alien x screw mods kept coming loose so I was told to use that, it helped me. I hope it helps you.

wscywabbit
04-18-2013, 02:58 PM
X2 on the blue loctite! ;)

TEN RING
04-18-2013, 05:48 PM
I put string wax on mine works great

Hutch~n~Son Archery
04-18-2013, 05:50 PM
I put string wax on mine works greatx2 I do the same.



Hutch:cool:

Sonny Thomas
04-18-2013, 09:05 PM
Like others I've used string wax and had success.

One thing I didn't like about the mods screws was the small allen hole. Quite a few times I did away the the Martin mod screws and used the large allen hole Pearson mod screws.

alienshooter
04-19-2013, 09:09 AM
Nice tricks of the trade, yeah I almost stripped out one of my mod screws "almost".

bfisher
04-19-2013, 09:25 AM
I use the blue loctite, too. It actually comes in a red tube and is #242. I don't have the tube. Mine is in a 1.69 fl oz bottle which will last forever.

Durandal
04-19-2013, 12:50 PM
Thanks for the replies gents. I'll start with the string wax and move up to the loctite if that fails.

cheers!