View Full Version : Nitrous Cam - different sizes
08-12-2014, 08:31 AM
I have a 2004 razor. I have the Nitrous Cams size B on the bow at the moment. Do the Size A cams allow for longer or shorter draw length?
I have damaged the size b on the bow and have access to some size a cams and was wondering what the difference is.
08-12-2014, 09:43 AM
Nitrous cam draw lengths varied a bit depending on the riser they were on but generally; A cams are short draw cams 23" to 26". B cams are 25" to 28" and Cams are 28" to 31"
08-12-2014, 10:40 AM
That works out perfectly for me. I'm on the shortest draw length on the B cam so I can go to the long draw on the A.
08-12-2014, 12:41 PM
If your B cam wasn't damaged you could look for a set of mini-mods which lower the draw range by 2". The A cams do the same thing and being as you already have access to a pair that's what to do. Good luck.
08-13-2014, 01:28 PM
I have two set of 65% mini mods, and no need of them. :)
08-29-2014, 10:00 PM
I have two set of 65% mini mods, and no need of them. :) Do you also have the X-mods to match them?
08-30-2014, 12:00 PM
Do you also have the X-mods to match them?
No, sorry just two sets of cable side mini mods.
Where have you been, long time since I've read you on this board? Welcome back! :)
Powered by vBulletin® Version 4.2.2 Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.