View Full Version : draw weight

buck hunter
04-12-2008, 09:10 AM
can i change the draw weight fron 65-70 without needing a bowpress i think i can but im not to shure

04-12-2008, 05:38 PM
Sure can. Just use a 3/16" allen wrench and put 1 1/2 turns on the limb bolts. If the bow is a 55-70 and set to specs it should make it to just about 70# that way. You get about 3 lbs per complete turn.

buck hunter
04-12-2008, 06:42 PM
thank you for the information on the bow