PDA

View Full Version : firecat prox



rob
09-08-2008, 09:08 PM
I have a firecat pro 70# 28" bow. i have a metal to metal sound around the riser(i think). I pulled the sights off and changed the rest to see if that would fix it but it did not. has anybody had this sound on their firecat. the bow shoots very very good. it just has that sound.

Aim4gold
09-09-2008, 06:25 AM
Are you shooting near the bottom of your poundage range? Bows set to there lowest poundage can make sounds?

Pluck your string like a guitar - sometimes that will help find it?
Are you sure all the nuts/bolts on your attachemts are tight, like a pin guard
Is your quiver attached?

bowgramp59
09-09-2008, 07:03 AM
check your limbs

rob
09-09-2008, 04:04 PM
everything is tight and its on 70#with is the top of my range. no quiver or sights and i changed the rest.

goinhtn63
09-10-2008, 03:23 AM
Check your lower limb right at the black pivot. I have busted 3 limbs at that spot and it made a creaking noise before it broke.

cmherrmann
09-14-2008, 12:12 PM
Check to see if you cables are touching the draw modules. All that have to do is barely touch the module and you will get a metallic twang,