PDA

View Full Version : Draw Length Adjustment



cchang
10-18-2005, 03:19 PM
Hope you can help a newbie. I have a an old Martin Lynx with a DL of 29 - 31. I have a DL of 26" What do I need to do to adjust the DL? Short of selling it .

Thanks
Cchang

Lifer
10-18-2005, 05:27 PM
To confirm, the wheels on your bow are round, at least on one side. The 29"-31" range is accomodated by using the three tri-draw slots located on the side of each wheel. To reduce the draw length to 26" will require a smaller pair of wheels, which will also result in a reduction of about 20-25 lbs. of draw weight. Sorry, but there isn't a way around that.
Hope that all helps.

cchang
10-19-2005, 02:08 PM
I was afraid of that. Maybe if I do some stretching execises I can lengthen my arms. LOL.

Cchang

gkoerner
11-20-2006, 12:55 AM
Are new wheels available for this bow?

gus



To confirm, the wheels on your bow are round, at least on one side. The 29"-31" range is accomodated by using the three tri-draw slots located on the side of each wheel. To reduce the draw length to 26" will require a smaller pair of wheels, which will also result in a reduction of about 20-25 lbs. of draw weight. Sorry, but there isn't a way around that.
Hope that all helps.