View Full Version : alignment questions
12-28-2008, 11:27 AM
I shorten the draw about 1 inch on a 09 FireCat now the alignment is off. What could be done to fix this or is it the bow?
12-28-2008, 02:23 PM
Please explain yourself. The alignment of "what" is off? How did you shorten the draw? I would assume by using the rotating module. Did you do the same on bottom and top cam?
when you first start to pull the string the string is riding on the edge of the cam. When you pull it back mabey 2 inches it snaps down into the grove in the cam. When you hold the bow up and view the alingment it appears the string is setting to the side of the cam
12-28-2008, 06:30 PM
How (EXACTLY) do you go about shortening the draw length?
If you return the bow to it's previous configuration does this alignment issue go away?
12-29-2008, 10:02 AM
Yeah, something doesn't sound right here. As Sandsuid says, if you move the module back to it's original position does the problem go away?
Also, are you taliking about the string or the cable where it rolls into the module groove? Any way you can post a picture? I have a FireCat so I could compare if there is a picture.
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.