PDA

View Full Version : Draw Length



Unregistered
01-17-2009, 10:20 AM
Hi Guys, i have a Martin Jaguar with a fusion cam and i need to find out which module from f1 to f7 i need to use as i have a very short arm length of 1.810m from tip to tip, what would you recommend i do to reduce the DL as it is set on 30" DL at the moment.

if you guys could let me know

snurdly
01-17-2009, 05:45 PM
Well, if the online calculator is working correctly... 1.810m would equal 71.25". You divide that number by 2.5 and get a draw length of aprox. 28 1/2".
Looking at the past spec charts off the Martin home page, Fusion cam bows list the Jaguar model (between 2001 and 2003) using an F1 module for 28" draw and an F2 mod. for a 29" draw.
I would guess the F1 mod will get you there, but you might want to wait for some confirmation from another member that knows the Jaguar model better than myself.