PDA

View Full Version : whisker rest ????



redeemed
02-19-2009, 06:30 AM
Does the whisker biscuit rest need to fit snuggly around the shaft?
it seems as if the bow I bought that has a whisker rest may have a different diameter hole in it. My carbons fit kind of loose in the hole, do they need to be touching all the way around the inside of the biscuit?

08BENGAL
02-19-2009, 06:55 AM
You should have just a slight 1/32" clearcnce or you will create drag and loss of speed. They sell several different sizes. Sounds like your ok if your not too loose. Hope this helps.

razorjack
02-19-2009, 04:43 PM
Does the whisker biscuit rest need to fit snuggly around the shaft?
it seems as if the bow I bought that has a whisker rest may have a different diameter hole in it. My carbons fit kind of loose in the hole, do they need to be touching all the way around the inside of the biscuit?

Hello,yes they should fit loose,for carbons you should have the medium biscuit......:D

oktx
02-20-2009, 01:22 PM
Hello,yes they should fit loose,for carbons you should have the medium biscuit......:D

Large will work also.