View Full Version : Dumb question: How do I adjust the pull on my Cheeta?

02-19-2009, 06:05 PM
I have been shooting an older PSE and recently traded an old boat for a brand new Cheeta. It has been a couple of years since I have shot the PSE and the draw is set to the max on the Cheeta. I would like to lower the pull and work my way back up to a comfortable pull for acuracy and comfort. On my PSE all I had to do was use an allen wrench to equally loosen or tighten the bolts holding the limbs to the riser. Do I do my Cheeta the same way? Thanks in advance for anyones help as I am new to this forum.

02-19-2009, 06:30 PM
I believe I have found my answer from a video link provided by SandSquid about how to take down a bow without a press. I am going to try giving my limb bolts a couple of turns and see what happens.

02-19-2009, 07:30 PM
Yep you got it....................:D

02-20-2009, 12:47 AM
Remember not to trun them out more than 5 full turns if you want to keep the warranty. ;)

02-20-2009, 09:53 AM
You'll be reducing the draw weight by about 3# per turn.