View Full Version : MPro mod question

03-16-2009, 09:37 PM
I have a Bullet x coming but the guy only had the F5 mod which is supposed to be 28".I shoot 27-27.5"dl. My question is that I was wondering if there is a half inch adjustment up or down or am I going to have to find an F4 mod.

03-17-2009, 12:08 AM
You can change the drawlength on an MPro Cam by changing the string from post 1 to post 2 and vice versa. You will find these marked posts on the Cam itself. I am not sure if you will enhance your draw by 0.5" or shorten it by 0.5" if you change the length so you will have to try that out.

03-17-2009, 08:12 AM
If the F5 is giving you a 28" drawlength with the string on the #1 post moving it to the #2 will give you a 27.5" drawlength. I had to do this on my Pantera. I am a 28.5" drawlength so I put the 29" mod on and move to #2 post and it is at 28.5".

03-17-2009, 09:10 AM
Thanks for the info. Just in case I think I will try to find an F4 mod just in case