PDA

View Full Version : Nitrous cams on Cheetah?



mroberts80276
04-16-2009, 07:00 PM
would i be able to mount some nitrous c cams on my 08 cheetah without adding anything other than custom length strings and cables?

SandSquid
04-16-2009, 07:59 PM
would i be able to mount some nitrous c cams on my 08 cheetah without adding anything other than custom length strings and cables?

You'd need a wider axle and string anchors on the idler wheel end also.

Let me know how it turns out.
I've considered putting Nitrous-X on my wife's LH cheetah....

mroberts80276
04-16-2009, 08:22 PM
when its all said and done i'll post some pics!

scepterman30x
04-17-2009, 07:18 AM
You'd need a wider axle and string anchors on the idler wheel end also.

Let me know how it turns out.
I've considered putting Nitrous-X on my wife's LH cheetah....

If it already has an axle and anchors on the idler wheel end...why would he need longer ones? If it is a single cammed bow he would need one on the cam side and if it is a CAT cammed bow he woud need one on either side but I don't think it came with the CAT cam.

mroberts80276
04-17-2009, 09:26 AM
the cheetah right now has the single m-pro cam

scepterman30x
04-17-2009, 11:56 AM
Then all you would need is a longer axle for the bottom unless you want the extra long axles for the wider cable system. Then you would need the long axle kit.

SandSquid
04-17-2009, 01:11 PM
Who would bother to put Nitrous cams on a bow and NOT put the X-Modules on them?

scepterman30x
04-17-2009, 01:35 PM
I concur. However it may be an issue with the wide axles and a BH shorter than probably 6.5" with some folks.

mroberts80276
04-17-2009, 05:08 PM
what speed increase should i expect with this setup, with the X mod?

SandSquid
04-18-2009, 07:07 AM
what speed increase should i expect with this setup, with the X mod?

X-Mods do not increase speed, at all in my experience... just bunches easier to tune

mroberts80276
04-18-2009, 12:50 PM
any speed increase with the nitrous cams over the m-pro?

scepterman30x
04-18-2009, 04:37 PM
Yep, more than likely.