View Full Version : Scepter II Elite draw length help, please?
07-14-2009, 09:06 AM
I am aquireing two older Martin Sceptor II Elite bows with "Z" cams. One is set at 29" draw and I would like to lengthen it to 31". The other is set at 29" and I would like to shorten it to 27.5". Is this possible? Will I need to locate some type of "modules" to accomplish this? Thanks...
07-14-2009, 01:37 PM
You can get 31" easily with a #5X module for either bow however you probably will not get 27.5". The #2X module only goes to 28" for you particular bows and the #2X module is as short as they get...you might be able to short string it by 1/2 to 3/4 inch and get 27.5". They do make a Mini-Z cam but I don't think they have any more of them and even if they did it would create more problems anyway since it would mean new strings and cables and higher poundages in the pull and I don't think you would get much more than 28" draw at the max...so it is pretty much a moot point.
Hope this helps.
Powered by vBulletin® Version 4.2.2 Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.