PDA

View Full Version : 09 Moab question



Dave308
08-06-2009, 06:29 AM
The website says it has a 31" draw and the cam chart says it only has a 30" draw. Any idea what the real max draw is?

alex
08-06-2009, 07:56 AM
My 08 MOAB goes to 30. In the matter of fact it is a little strange because with F5 the bow has DL of about 26!?! :( :confused: (And the BH and the ATA are normal)

bowgramp59
08-07-2009, 06:47 PM
my 09 is 25 to 30 , with a f-2 mod and d-loop that gives me around 27 " draw if i didn't use a d-loop i would go to the f-3 mod and the #2 pin

bfisher
08-09-2009, 04:59 PM
My 08 MOAB goes to 30. In the matter of fact it is a little strange because with F5 the bow has DL of about 26!?! :( :confused: (And the BH and the ATA are normal)

As with newspaper articles, don't believe everything you read. The Moab has a 25" draw (or close to it) with the F1 Mod. Go up one inch for each number above that, so the F5 mod should give a draw length of just about 29". The F7 is for 31".

And if they all are similar to mine they may draw a half inch longer than marked. Never trust a limb sticker or tech cam/module charts. Measure the actual draw length of the bow at full draw to confirm that the bow draws what it's supposed to. And that means every bow by every manufacturer.