PDA

View Full Version : Cam problem..



Coop
08-17-2009, 08:11 PM
Can anyone tell me what cable I am suppose to twist or untwist, if my bottom cam is under rotating? I have the dual furious cams..

Thanks,
Coop

davydtune
08-18-2009, 12:22 PM
The cam that contacts the stop first needs to have it's cable twisted up. This will pull that came back a bit. I'd only go one twist at a time. If not enough twist another. If you get too much, either take one back out or twist up the other cams cable.

Montalaar
08-19-2009, 01:17 AM
If you have enough twists in the cable the connects to the other cam then untwist that cable also. If you put twists only in one cable you might get the ata out of spec.

Coop
08-19-2009, 02:37 PM
Appreciate the info...

Thanks Again,
Coop