PDA

View Full Version : M-Pro Razor



wisecane
08-27-2009, 10:25 AM
Anyone ever put M-Pro cams on a Razor? Might have the chance to try this out and was wondering.

Montalaar
08-27-2009, 11:27 AM
Yeah, i think that has been done before. Must be super smooth and forgiving.

scepterman30x
08-27-2009, 11:48 AM
Yeah LeEarl over on AT did it with mini-M pros...had 14" mag limbs though.

wisecane
08-27-2009, 12:23 PM
I pm'd him, curious to see what he says

scepterman30x
08-27-2009, 12:42 PM
Go to this thread http://www.archerytalk.com/vb/showthread.php?t=729091 and have a look see.:D

scepterman30x
08-27-2009, 12:43 PM
OK Jim stop drooling.:D

wisecane
08-27-2009, 01:03 PM
That thing looks sweet. Now the question is what happens with 17" Elite limbs. Oh BTW you were right about the Duravanes, they are the 3D and they don't offer them in orange so it may just be red/yellow after all. I will ask the guys what colors and we'll go from there.

scepterman30x
08-27-2009, 01:08 PM
10-4. As far as the 17" limbs...you will have a very forgiving 43" A/A + 9" of brace or so and did I mention ho-hum as far as speed and at your DL it will be at the lower (maybe the lowest) mod setting you have...but doable.

wisecane
08-27-2009, 01:15 PM
But if I do my part, it should stack arrows in a 20 yd spot like pancakes in an IHOP. And then the SlayR can wear the NOS cams. Ohhhhh the possibilities.

scepterman30x
08-27-2009, 01:32 PM
Yep, with Martin they are almost limitless...unfortunatley the funds are.:(

scepterman30x
08-27-2009, 01:37 PM
I pm'd him, curious to see what he says

PM him again and ask him what that bow was that he was going to post some pics but never did. It was a 17" limbed bow of a sort...probabley a Scepter riser or a Razor. It was a 43" A/A bow w/ the Mini-Mpro. Ask him what the specs where. It was this post: http://www.archerytalk.com/vb/showthread.php?t=717833

Jake-the-snake
08-28-2009, 09:07 AM
what kind of m-pro is that? i have never seen one of the original gray ones with a draw stop...:confused:

wisecane
08-28-2009, 12:20 PM
Here was his response:

The regular M-Pro will be a very long draw on the RazorX riser. You could have a draw close to 40" if you leave the Elite limbs on the bow. Never did that.

scepterman30x
08-28-2009, 07:07 PM
We knew that...we want to know what he had with the Mini Mpro. I mean I know by doing the math but I wanted to know what he came up with. Since he said that I guess he used a Scepter riser to build the one he never left pics for?