View Full Version : Vane contact?
09-19-2009, 03:38 PM
I recently bought a new MOAB Hunter. I installed a QAD drop away rest. The rest is marking the vanes. I've tried both rests that come with the QAD, I've tried lowering the clamp that holds the string, I've tried cock vane up and down (QAD says up). The bow tech at the dealer where I bought the bow has looked at it, no luck. Any suggestions???
09-19-2009, 09:42 PM
is the flats hitting the arrow rest meaning the two prongs or is it hitting the hold down bar because i had the same problem and i just had to put on the othe rongs that come with the rest and had to turn the cock feather up try this and see if it works for you when you bought the rest it shoud have came with a sare arrow holder and the spare is actually a 1/8th inch higher made just for this problem any way hope this helps
09-19-2009, 11:02 PM
I also have a QAD all i did was put the other prongs on and shoot cock feather up. I was worried that it was bouncing up and making contact then. the tec at the shop told me that the older models had issues with this
Powered by vBulletin® Version 4.2.2 Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.