View Full Version : 09 Cheetah
10-24-2009, 09:23 AM
Got a new martin cheetah and just took notice that the M2 cam is very close to the limb (I believe it is even scraping it at one point. It appears as though there is no spacer on that side of the cam but there is on the other side. Is this right or was the spacer put on the wrong side when it was assembled. I'd like to know before I continue to shoot it and either damage the cam,limb or both?
10-24-2009, 10:47 AM
Here is a photo of my cheetah cam, let me know if the pic helps, i can take more if needed.
10-24-2009, 04:18 PM
Yes, Mine looks about the same as yours. Take a close look when yours is at rest (undrawn) and see if you can detect any scuffing of your limb wher the cam is at it's closest point to the limb. On mine it is like a very slight white mark on the cam.
10-24-2009, 05:50 PM
Mine has no scuffing, the cam doesnt touch the limb at any point, in the first pic you can see the clearance and the second pic you can see the small spacer on that side. There is a larger spacer on the right and a smaller one on the left.
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.