PDA

View Full Version : different cam for 08 MOAB



bohntr
12-14-2009, 05:35 PM
Recently had some work done on my bow and put the M2 cam on by 08 bow and come to find out that the string and cables may be different size but can't figure out what they should be .....could someone help with this situation and any suggestions would be apprecitated

bfisher
12-14-2009, 05:41 PM
Recently had some work done on my bow and put the M2 cam on by 08 bow and come to find out that the string and cables may be different size but can't figure out what they should be .....could someone help with this situation and any suggestions would be apprecitated

Did you change from one cam to another? If so what cam was on the bow before? I assume you changed from Mpro to M2Pro.

In any case all you need to do is look at the spec charts for a 2009 Moab. String and cable lengths are listed. Shooting string----90" Split (cable)--- 34.5"

bohntr
12-14-2009, 05:45 PM
yes I went from the mpro to the m2 but aren't those specs for the roller guard which I don't have

bohntr
12-14-2009, 06:00 PM
or does the roller systems make that much of a difference in the length ..using the slide right now with a set of old string and cables

bfisher
12-14-2009, 07:25 PM
Somewhere along the line they changed the cable length, adding 1/2" to accomodate the CSS, but I don't know if the 2009 chart reflects this or not. And I can't get the 2008 charts to check cable/string sizes for comparison.

OK, you have it together. How are the specs? Close? What string/cable length is on the limb sticker?

Dave308
12-15-2009, 02:00 AM
08 MOAB Shooting String 90" Cable 34.25"

09 MOAB Shooting String 90" Cable 34.5" with CSS