PDA

View Full Version : Cable length



RobD
02-02-2010, 10:19 AM
I have a 09 Firehawk,Its shooting great. I adjusted the cams to remove most of the hump,n to get optimum performance according to this thread http://www.archerytalk.com/vb/showthread.php?t=626601. It is shooting great,with very little hump. When I adjusted the cams I had to twist my cables a lot to get the cams rotated to were they are.[09 from the post] which shorten the cables.my question is Im going to order new a new string and cables,Should I order my cables 1/4 -1/2 inch shorter so I don't have to put so many twist in the cable or just leave it factory length.Thanks in advance for your input.

FireHawk Owner
02-04-2010, 09:46 PM
I have a 09 Firehawk,Its shooting great. I adjusted the cams to remove most of the hump,n to get optimum performance according to this thread http://www.archerytalk.com/vb/showthread.php?t=626601. It is shooting great,with very little hump. When I adjusted the cams I had to twist my cables a lot to get the cams rotated to were they are.[09 from the post] which shorten the cables.my question is Im going to order new a new string and cables,Should I order my cables 1/4 -1/2 inch shorter so I don't have to put so many twist in the cable or just leave it factory length.Thanks in advance for your input. I would stay with factory specs and just twist up the cable to get your cams rapped up were u need them, good luck :D