View Full Version : Fuzion cam
02-05-2010, 07:13 PM
Was wondering what the 1 2 3 means on cam. As you can probably tell I don't know alot of the technical stuff, just like shooting. Thanks
02-05-2010, 10:11 PM
The three numbers on the cam are draw length incremental increases for that particular module Ie., Post 3 being the shortest draw and 1 being the longest draw available for that module. I think each is a 1/2'' difference from the next Hope that helps.
02-06-2010, 06:10 AM
Thanks. Any idea if the let off is adjustable, if so how
02-07-2010, 12:38 AM
Take a look at your current module and see what is marked on it. Eg. F5# or F5#\. The mod with the slash is 65% let off and the mod with just # is 75%. Probably the only way to get the 65% mod is with a metal mod as most fiber after market mods seem to be 75% Try Martin or check out AT. forum or even eBay. Just adding to the bit about posts on the cam, No. 2 post is the prescribed post for a particular mod. with the 3 post being shorter and the 1 post being longer. Each move will alter the poundage by 1lb.
02-07-2010, 07:54 PM
my mod# is F-4
02-07-2010, 08:06 PM
my mod is F-4 which is 28dl and on post 1 so what does that make my DL. Thanks
02-07-2010, 10:29 PM
It all depends on what model of bow you have and year model. For example a 2001 phantom magnum, has a 28'' draw on No 2 post, a 2001 phantom has a 30'' draw at the same post , 2002 phantom 11 has 28'', magnum has 28'' and a 2003 phantom 11 has a 30'' draw on 2 post. Check out the Martin website and go to past specs and you should find all the info you need
02-07-2010, 11:01 PM
If "F-4 which is 28dl" is supposed to say that you know that F4 ist 28"-Drawlength and your string is sitting at the first post your draw length will be 28.5".
Powered by vBulletin® Version 4.2.2 Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.