View Full Version : Martin 2009

03-05-2010, 03:29 AM
I am a happy owner of the bow Mystic 2009. The site MARTIN 2009 on the main page (http://www.martinarchery.com/mystic.php) set to ATA 39,25, but in the technical specifications (http://www.martinarchery.com/tech2009.php ) set to ATA 40,25. I would like to know why? (On my bow real value of ATA 39,25, cable-41,25, string-52,5).
Sorry for my bad English))).

03-05-2010, 03:53 AM
Hi Igor.

Well.... Maybe someone else can answer this question but i'd say if you are satisfied with your actual bow and if it shoots good then do not worry about that one inch.

03-05-2010, 04:21 AM
I do not know whether or not satisfied ))))). I was shooting from BowTech Constitution, it is a good and accurate bow. But it has a "hard wall" and it is difficult to pull back. My friends suggested me to try Mystic. Yesterday I shot at 18 meters and had a lot of 8 and 7 on the horizontal. I think that the problem is in contact arrows and cables. So I began to check the parameters of bow ...

03-05-2010, 04:34 AM
There are two possiblities:

1) Stay with the current ATA and do some walkback tuning and so on.

2) Get new cables and string to change the ATA and tune then in.

I would recommend to try with the current ATA first. Do some tuning, get the right nocking point height and so on.

Oh, by the way. Where are you from?

03-05-2010, 04:51 AM
Thank you.
Of course, the ATA has little effect on the horizontal deflection arrow. I will try a longer bushing (I have x - system) or the cable guard. I am from Russia.