PDA

View Full Version : Need help in a major way!!!!!



retlaw
03-12-2010, 03:41 AM
I took on the task of changing my string on my bow, but forgot to mark the cam before removing the string. I have a Monster Buck Hunter with M-Pro cam. Could anyone post a picture of were the cam should be after it's strung up, or tell me what I'm doing wrong. The shooting string is tight, but the cables are loose. I can take my hand and rotate the wheel and everything tightens up. Please any help will be greatly appreciated.

Montalaar
03-12-2010, 03:50 AM
Have a look in the manual of your bow. It will show you how the cable and string has to be.

If you do not own your own manual have a look at this one:

http://www.martinarchery.com/manuals/2009MartinBowManual.pdf

alex
03-12-2010, 04:22 AM
I've posted pictures of my M-pro cams somewhere in this forum, but have no time to find them now, sorry. Try to search "M-pro" and you'll find them. About the string and cable - are they the correct lenght? Try to twist and untwist them.

retlaw
03-12-2010, 06:46 AM
Thanks guys for the help.

retlaw
03-12-2010, 01:57 PM
come to find out the cable they sent me was a 1/4" short!!!

bfisher
03-12-2010, 06:24 PM
come to find out the cable they sent me was a 1/4" short!!!

How did you measure it? Proper way is to stretch the string or cable between two 1/4" rods such as on a string making jig to a tension of 100#. Then measure to the outsides of the rods.

copterdoc
03-12-2010, 06:27 PM
A 1/4" short cable won't ever cause the problem you are describing.

You have something routed wrong.