PDA

View Full Version : Ata martin firecat pro-x 2009



maggx5
03-12-2010, 02:08 PM
I NEED TO KNOW THE CORRECT WAY TO SET ATA BACK TO SPEC. WHEN I GOT BOW IT WAS OUT OF TIME AND I TWISTED CABLE AND GOT THAT BACK TO SPEC. I HAVE DONE ALOT WORK ON SINGLE CAM BOWS BUT THIS FIRST TWO CAM SPEED BOW I HAVE HAD. THIS IS A NEW BOW.


THANKS MAGGX5:confused:

Spiker
03-12-2010, 02:43 PM
Twisting Cables:
Retards Cam, Increases DL, Increases DW, Decreases ATA, Increases BH.

Untwisting Cables:
Advances Cam, Decreases DL, Decreases DW, Increases ATA, Decreases BH.

Twisting String:
Advances Cam, Decreases DL, Decreases DW, Decreases ATA, Increases BH.

Untwisting String:
Retards Cam, Increases DL, Increases DW, Increases ATA, Decreases BH.

Tightening Limb Bolt:
Advances Cam, Decreases DL, Increases DW, Increases ATA, Decreases BH.

Loosening Limb Bolt:
Retards Cam, Increases DL, Decreases DW, Decreases ATA, Increases BH.

(if I got something incorrect someone jump on me.)

maggx5
03-12-2010, 04:56 PM
Thanks i will give a try